Replaces barrel vice and totally secures and protects receiver during removal and replacement of barrel assembly. Totally eliminates any possibility of damage to barrel detent pin or receiver detent notch. Fits all model Mil. Spec. receivers (flat top or carry handle) and is made of high pressure structural vinyl foam. U.S. Military Issue.

This adapter allows the attachment of a Harris Bipod to any picatinny rail. Made from aircraft quality aluminum and hardcoated to military specs.

Telescoping AR15/M16 stock with Battery storage. Comes with Recoil spring tube, spring and buffer. Introducing the new Telescoping AR15/M16 stock with battery storage tubes on the side. This five position telescoping stock has two storage compartments with O-ring sealed screw in caps. The storage compartments are water tight and will hold two AA or three 123 Lithium batteries in each side. The stock has a nonslip hard rubber butt plate and three places to attach a sling These stocks have our life time warranty and built tough enough so you never have to use it.

Slides easily into the sight grove of the carrying handle and mounts with one screw. Weaver base. See Thru. Comes in black only.

REMOVES HANDGUARDS IN SECONDS!
This clever tool makes one-handed handguard removal a snap. Just hook into the mag well, grip the handles and push the slip ring back, so easy the handguards practically remove themselves! Tool is coated so it will not scratch the rifles finish. Will work on 16 , 20 or 24 barrels.

Adjusts both front and rear sight on the A1.

Makes adjusting the front sight on your A2 a snap.

Attaches to a variety of flat top upper receivers made from solid Mil-Spec parts. Height of sight lines up with standard front sight.

Specifications: Colt 3 dot green front & green rear night sights for M16/AR15. Trijicon self-luminous iron sights are proven to give shooters five times greater night fire accuracy-with the same speed as instinctive shooting. Trijicon is proud of its reputation for incredibly reliable night sights. The unique shock resistant design is patented and used exclusively by Trijicon. That's why Trijicon Bright & Tough night sights are the first choice of major handgun manufacturers, and standard issue with hundreds of municipal and county departments, numerous state police departments and several Federal agencies. Their metal body is precision machined and custom manufactured for specific handgun makes and models. Glass lamps filled with pressurized tritium gas, glow bright green at night. Warranted for 12 years. Professional gunsmithing by a Trijicon-approved gunsmith is required to obtain the 12-year warranty against lamp failure. Polished sapphire windows, aluminum cylinders, silicone rubber cushions the glass lamp within the aluminum housing for excellent shock protection, and the larger front dot provides extra distinction and brightness. Installation tool included.

Securely mounts to the front sight providing two rails for laser and light equipment to be mounted. Features: •2.5” 4 position Picatinny rail on each side •High density polymer construction •Easy to fit/remove and secured by Allen bolts •No gunsmithing required

Locking detent with stepped down turns provide a surface you can grab onto in all conditions. A2 style dual aperture is fully protected with thick pivot ears. Made from 6061 aluminum and hard coat anodized. Picatinny and Weaver Mount compatible.

Easily mount any 1” diameter light (such as Surefire 6P, 9P or G2 Nitrolon) to any Picatinny or Weaver rail system. Puts the light at the optimal position for tailcap activation with the offhand thumb.

A combination of a Tri-Riser with a rear A2 adjustable sight assembly. This Sight Rail system is approximately 1/2" higher than the Low Rail series. This allows you to attach a optic to the top of the rail and other rail-mounted accessories such as flashlights and lasers. Made from 6000 series heat-treated aluminum.

Hands down, this is the most advanced design made and conceals 99.9% of flash on even short barrels! Four angled flutes dissipate the gas but contain unburned powder allowing increased residual burn for less visible flash. They have passed torture tests at Aberdeen Proving Grounds and are in heavy use by U.S. govt. agencies, U.S. military forces and are combat proven in the Middle East and other hot spots. The 2 1/4" Vortex is machined from 8620 bar stock and case hardened with a black parkerized finish. For pre-ban threaded .223 barrels only. Military Style has a groove behind the flutes to attach a Blank Firing Adapter.

Machined from 6061 T-6 Aluminum and hard anodized for corrosion resistance. Gives your AR-15 a sturdy forward grip that improves handling, retention, and recoil control during rapid fire. It easily attaches to standard handguards (full size & shorty) with a supplied mounting plate. A threaded rod thru the center of the grip makes for rapid attachment or removal from the mounting block. Installs without fitting and is an instant upgrade!

Add this grip to the handguard of your AR-15 or Car15 for greatly improved handling. This is an excellent addition for CQB or patrolling. The grip area is rubber coated in a diamond pattern for comfort and traction, and the bottom unscrews to reveal a handy storage compartment. Fits ARE-15, CAR-15 and M-4 handguards. Fits all U.S. made handguards with Picatinny rails as well, such as the Knights units. Will not fit free floating, nonvent handguards. Installation is easy and mounting hardware is included. Grip and mount only.

Convert your existing A2 or Hogue pistol grip to an instant stowaway grip! Fits snugly and offers convenient storage for spare parts. Made of 70 Durometer black rubber.

This one-piece riser and ring combo delivers extra security since the rings are permanently mounted to the riser for added strength. The caps are secured with four hex screws each and give a rock solid grip to the scope. Two large, knurled thumb screws and a clamping bar lock the mount to the receiver. Fits scopes with 1" diameter tubes.

The finest scope mount ever devised for the AR-15/M16. Accepts most current military and police sighting systems without the need of adaptors. Accepts Weaver style and NATO Stanag mount systems. Precision machined for snug fit and continuous zero hold. Wide angle TV shaped see thru iron sight. Self-locking thumb nut, guaranteed not to loosen. Used by U.S. Military and Police Officers. NATO stock number 5855-01-299-7777.

Replace your right handed safety with our New Double Head Selector. Switch to safe or fire from either side of the receiver. No Gunsmithing Required, right side is already drilled and tapped for easy installation.

Advanced engineered polymer body, completely translucent and impact resistant. Round count markers. Hardened steel feed lips, PTFE coated for corrosion resistance. Rubber coated bottom, easy to remove. Constant curve internal geometry with a customized follower. Smoke colored.

The HK High-Reliability 30rd Steel Magazine is the Mercedes of AR-15 magazines! It has a well executed design, special attention to production tolerances, a steel magazine housing and follower and a proprietary HK "Maritime" anticossosion coating. It is considered by users in elite US military and law enforcement units as the best AR-15/M-16/M4 magazine in the world. In US military testing, the HK magazine improved feeding reliability by 30-50% overall. The Maritime coating easily surpasses the US MIL-STD-810 E salt fog test. During this test the magazines were exposed to a 100 hour salt fog and then stored three days at ambient temperature. After this procedure each magazine was fully loaded and fired twice with no problems. The superior function was validated during three separate tests by the British MoD in arctic, jungle, and desert environments during the firing of more than 1/2 million rounds. *Note: This magazine has the following markings: 5.56 x 45 Restricted Law Enforcement/Government Use Only 10-94; Heckler & Kock GmbH - Made in Germancy; Heckler & Koch Inc. - Sterling VA.

Restrictions are observed in the following cities and/or states prohibiting the sale or shipment of magazines with more than a 10rd capacity to: Aurora, Il; Chicago, Il; Cook County, Il; Cincinnati, OH; Columbus, OH; Toledo, OH; South Bend, IN; All of CA; All of HI; All of MA; All of NJ; All of NY
The sale or shipment of magazines with more than a 20rd capacity is restricted to the entire state of Maryland.

Buffers AR15/M16 cycling system to reduce wear, provide a more solid feel by eliminating play in the receiver. Easy to install, requires no modification to the weapon.

Reloaders rejoice! Keep up with your brass without crawling around. This is the brass catcher of choice for the U. S. Marines. This handy catcher attaches to all flat top and carry handle AR's by wrapping the Velcro strap around the handguard. The mouth automatically lines up with the ejection port and the zipper on the bottom lets you empty the catcher without removing it. It's semi rigid frame makes it ideal for all shooters so you don't hit your fellow shooters with hot brass. Also for Shoot and move drills or CQB training, helps reduce the amount of loose brass rolling around on hard floors. With it's heavy duty zippered bag it is quick to empty and get back to practice. The mesh bag design allows gases to vent away from the shooter and easily view how much brass has been collected. The best part is it allows you to spend more time shooting and less time chasing empty cases. Holds approx. 60 spent cases. Can be used on all AR-15 style rifles, M-16, AR-15 with .22 kits, AR-15 with 9mm kits, AR-10's and great for the range or varmint hunting.

The extra length provides leverage for barrel removal. •Install and remove free float tubes. •Install and remove barrel nut., flash hider, and buffer tube. •Includes a 1/2 drive for socket wrench. •Built in wrench for shorty stock. •Hole for hanging on wall.•Screwdriver tip for stock screw. Made form 4140 steel

This U. S. G. I., M- 7 bayonet features a black oxide finish 3 3/4" blade and includes a hard composite M-10 black sheath. Raised checkering on the handle ensures a positive grip even with wet hands. Overall length measures 11 3/4". made in the USA. Fits AR15/M16 with bayonet lug. New in wrap.

Sometimes a high capacity mag isn't the right tool for the job. when it comes to hunting or benchrest shooting, a compact 5 round mag fills the bill. The bottom extends slightly from the mag well allowing for proper seating, minimal mass and removes for easy cleaning.

Keep 120 rounds of .223 at the ready with these G.I. bandoleer kits. Each include: cloth bandoleer, 12 stripper clips, loading charger, clothes pin, and four cardboard boxes. New in wrap. NSN#LC-00J036-029

This handy kit allows for assault carry of you rifle. Military pattern with steel front loop and nylon rear strap. Includes 1 1/4 sling.

Our steel sling adapter conveniently replaces the receiver end plate, giving you twice the mounting options on either side. Round holes will accept slings with quick-release snaps and the slots take 1.25" wide webbing.

This 4x20 scope will mount directly to the carry handle of any AR15 or M16. No need to re-zero when the scope is removed and replaced. Includes built-in mount. Mil-dot aiming system • Red/Green dual illuminated reticle • Integral Carry Handle mount included • Complete with flip open lens cover.

Includes all those little parts that seem to fail at the worst times. Extractor, Extractor Spring, Extractor Pin, Firing Pin & Retainer Pin, Hammer Spring, Trigger Spring, Disconnector Spring and Ejector Spring.

Includes Pivot Pin, Take Down Pin, Hammer & Trigger Pin, Bolt Catch, Forward Assist Pin, Trigger Guard Pin, Gas Tube Roll Pin, Extractor Pin. Ejector Pin, Firing Pin Retainer, A2 Sight Roll Pins, Take Down & Selector Detents.

Includes the following springs: Trigger, Hammer, Ejector, Bolt Catch, Disconnector, Selector, Take Down (2), Mag Catch, Buffer Retainer, Front Sight, Ejector Cover, and Forward Assist.

Slides onto the Picatinny or Weaver base of accessory rails. Available in two styles: either Surefire or Streamlight Scorpion. Requires no tools. Can be installed and removed in seconds. No drilling or tapping necessary. Flashlight sold separately. Available only in Black.

These replace original hammer and trigger pins. They extend past the receiver on each side and are retained by special retaining rings for a positive lock. (Set of 2) (Not Available At This Time)

The MIAD features removable and replaceable front and rear panels for a custom fit over multiple hand sizes. The grip has improved ergonomics and positive rough texturing on the sides and backstraps. A removalbe inner core allows for storage of three rounds. Kit includes 3 size backstraps, 2 frontstraps, three-round plug and installation hardware. Easy installation, no fitting required. Color is black.

The oversize bolt stop is designed to assist you in tactical reloads. The large paddle is easier to hit during rapid reloads without having to feel around for it. It is especially helpful when wearing gloves. Fully serrated and CNC machined, the bolt stop installs easily. Fits all standard AR-15 style rifles.

This 2.25” polymer rail attaches to most collapsible stocks and provides a secure mounting point for the Adjustable cheekpiece (# FM77). Installs easily without modifications. Stock not included.

This 1 5/8” sling swivel has a push button design for quick detachment. Fits CAA AR-15 stock (#FM68) and CAA AK-47 stocks (#FM81,FM83).

This fully adjustable cheekpiece is designed to fit the Picatinny rail system of Command Arms collapsible stocks (# FM68, FM81, FM83). Quick-adjust knob allows for height adjustmnet and the cheekpiece allows for proper eye relief by moving horizontally along the rail system. If you don’t use the CAA stock (# FM68) but instead have the standard M-4 style buttstock you can use the cheekpiece in conjunction with our Picatinny Rail Adapter (# FM79). Black polymer.

Transform your classic SKS into a modern tactical weapon. Our Fusion System replaces all original stock components with lightweight composite parts. With 6 adjustable positions, this stock will accomodate most sized shooters. It includes a handguard with built-in Picatinny rail that doesn’t interfere with iron sights. The SAW style pistol grip has a more ergonomic angle and increased width for comfort & control and has a storage compartment inside. Works on all SKS models including the “D” model. This stock allows you to enhance the features and look of your current SKS without sacrificing the bayonet. Color: Black, does not include magazine or barreled action. Length of pull: 11.5” collapsed, 15” fully opened. Lifetime guarantee! This item is marked as “TAPCO USA” and counts as 3 U.S. Sec 922R compliant parts. Bipods will only mount on stocks that are NOT cut for bayonets.

The AR-15 is one of the most versatile guns ever invented, making it the ideal general-purpose rifle – easily configured for home and community defense, disaster survival, small- and big-game hunting, varmint shooting, pest control and subsistence hunting. It’s also a great gun for target shooting, competition and training, plinking and just plain fun. It’s an easy gun to handle and shoot, perfect for less-experienced women and children, with advanced capabilities to satisfy the most expert rifleman. Unless you have a whole house full of guns, each designed specifically to fill one of the many specialized roles an AR-15 can cover on its own, you really can’t get along without one. Best-selling author Bob Boatman briefly covers the background of the little black rifle that almost wasn’t, then dives right into a detailed examination of the modular design and what you can do with it. If you have ever wondered if the AR-15 could possibly live up to its reputation, or if you’re an AR-15 owner who wants to learn the best configuration for your gun, you owe it to yourself to read Living with the AR-15. 8 1/2 x 11, softcover, photos, 88 pp.

This Revolutionary Accessory enables you to carry a spare mag, ready to use, on your weapon. This grip serves as a spare mag carrier, but also as a unique ergonomic fore grip. Features: Quick Release button - just slide the grip onto the rail. • Backup Locking Screw - Should you decide to lock it in place when not using the quick release mechanism. • Magazine release button - similar to the AR15/M16 one - to quickly release the magazine. • Can be used as an ergonomic foregrip even without the magazine inside.

Attaching your 1” diameter light to your rifle’s rail system has never been easier! Our machined aluminum mount features a large thumb screw that allows you to mount your flashlight in mere seconds. It fits all Picatinny and Weaver style rails and accepts all flashlights with a 1” diameter body. Some of the lights it fits are: Surefire G2 Nitrolon, 6P, 9P and many more! Color is flat black.

Picatinny and Weaver Mount compatible.

Picatinny and Weaver Mount compatible.

Picatinny and Weaver Mount compatible.

Picatinny and Weaver Mount compatible.

Fits all AR15/M4 .223 rifles. Includes grip plug and gapper insert.
•Rubber overmolded
•Smooth, textured finger grooves.
•Integral rear upper extension supports the hands web
•Better weapon control, even when wearing gloves.
•Black only

Provides two rails positioned at 45o (will not interfere with iron sights) and one removable center rail. Excellent for bipods and light/laser mounts. Product Features: Two 2.5” Picatinny side rails, one 3” center rail •45o position allows for ease of flashlight operation while simultaneously holding grip •High density polymer construction •Quickly mounts on upper or lower existing handguard •Majority of handguard is left free to provide a secure grip •Fits standard handguards •No gunsmithing required

Master Gunsmith Larry Crow shows you the latest modifications you can make to your AR-15 to make it extremely accurate. You’ll see information regarding triggers, grips, sights, barrels, firing pins, gas systems and more, all designed to help you increase the accuracy of your AR-15. Plus, you see an in-depth discussion of high-end rifle scopes and how to use them for shooting out to 600 and 800 yards. This program is professionally produced by Lenny Magill, the world leader in firearm video instruction.

Stores, conveniently in the bottstock an dhas a built in alice clip to attach to web gear. Includes: Green nylon pouch, bore and chamber brushes, cleaning brush, oil bottle, 5 piece rod assembly.

Easy to install and compatible with all models of M14/M1A rifles. It has MIL-STD 1913 Picatinny Rails on the right and left side for handy mounting of accessories such as lights or lasers. Will not interfere with stock removal during field stripping. Constructed of 6061 aluminum, hard coat anodized for a lifetime of service.

Loosens the lock ring on the telescoping carbine stocks and will remove barrel bushing on 1911 style pistols.